Demo2 first Demo2 second Demo2 third Demo2 fourth Demo2 fourth Demo2 fourth Demo2 fourth
 
ABOUT US
INFRASTRUCTURE
PROCUREMENT
QUALITY
EVENTS AND EXHIBITIONS
MEDIA & PRESS RELEASE
CONTACT US
 
         
     
   
     
         
 
 
   
   
  PP-R PIPE  
  Product Code :  
  Advantages of PPR PIPE  
     
 
PPR-C stands for poly Propylene Random Co Polymers. It is a water supply pipe used in construction. It is an internationally approved, high quality environmentally friendly and energy saving pipe.
Lightweight : Density is 0.89-0.92g/cm3, only1/9 of steel pipe, therefore easy to transport and install.
Fine anti-heat performance : It is resistant to extreme heat/cold and will not deform or give in between-20 C to 95 Cenvironmental temperatures.
Good anti-corrosion property : It is resistant to corrosion, it does not rust,decay or recode.
 
     
     
   
  BASKET TYPE DIE HEAD  
     
 
Low heat conduction factor : heat conduction is 0.23-0.24w/ mk at 20 C, it is much lower than that of galvanized steel pipe.
  It endures to heat and high climatic temperatures. It reserves its original from, flexibilty and chemical properties at high temperatures.
Firm pipe fittings connection : Because polypropylence has fine thermal casting performance, thermal casting between the pipe and pipe fittings with the same material as a integration, it can prevent water from leaking.
 
     
     
   
 
The friction correlation is very low, the surface is clean and smooth and will not hold other particles to fill in canvities.
Reasonable Price: The price of PP- R pipe is near to that of galvanized pipe. The adhesion is very simple and easy by fusio-therm welding. Adhension is firm and will not effect the inner diameter. In the three layer PPR pipe, the inner layer is anti bacterial and the outer layer in UV (ultra Violet) rays resistant layer. It can be safety used for a duration of minimum 50 years. It is resistant to long term not water transmission and under normal environmental conditions it endures operational heat 70 C-95C. It does not absorb water, therefore may be safely used in hot temperatures and humid climates.
 
     
     
   
  Application : This line is mainly used for producing pipe from raw material PPR resin. It is also suitable for producing pipe of materials PP, PPB, PPH resin.  
     
 
MODEL (GROOVE FEED TYPE) PIPE RANGE (MM) CAPACITY (KG/HR) HAULLING SPEED (MAX.M/MIN) MAIN MOTOR (KW) TOTAL POWER (KW) LINE LENGTH (M)
             
HPMC 65 16-63 80 15 37 80 30
HPMC 75 16-110 125 17 55 105 38
HPMC 90 63-160 160 8 75 140 50
 
     
     
  We manufacture and export plastic processing machinery like Plastic Extruder, Twin Screw Extruder, PVC Pipe Plant, Pipe Extruder, HDPE Pipe Plant, Recycling machine, Plastic Reprocessing Plant, Co-Rotating Extruder, Drip Irrigation, Compounding Extruder, Pipe Machinery, PVC Casing Caping Machinery, Plastic Profile Machinery, LLDPE Pipe Plant and all kinds of Extrusion Machinery and Plastic Machinery.  
     
  >> Back  
 
 
 
Home  |  About Us  |  Products  |  Career  |  Support  |  Contact Us
Copyright@2012 Powered by Colour square